Please read the details▼
10mm Diameter Electret Condenser Microphone Element Insert with Connection Wires J60-C
This is on item of new electret condenser microphone element with 65mm long flying leads soldered on. The higher quantity options are cheaper per item. The wire is reasonably thick 7 X 0.2 type and is relatively easy to handle during installation without breaking it. These require a low noise power supply of between 1.5 and 10V fed via a resistor of approximately 1K Ohms connected to the red wire. The standard voltage for this type is 4.5V. A D.C. blocking capacitor of something like 10uF is then typically used to feed the signal into the microphone pre-amplifier. Some tape recorder microphone inputs may have this power supply and capacitor internally, in which case they will generally state that on the machine. The sensitivity is -64dB +/-3dB at an operating voltage of 4.5V. The current drain is 0.5mA maximum, S/N ratio is 40dB or better. The output impedance tends to be dominated by the bias resistor, so in the typical case it will always be less than 1K. A data sheet is shown in the secondary pictures. The diameter is 10mm and the total height including the solder terminals and wires is 8mm.
The vast majority of small items will not usually attract any more postage charges. Please use the shopping cart and checkout everything altogether with any available promotion codes for the best deal.
If you would like to buy *any* additional item from my store, the standard promotion codes are as follows:
10% off when you buy 2 items use checkout code SAVE10
15% off when you buy 3 items use checkout code SAVE15
20% off when you buy 4 items use checkout code SAVE20
25% off when you buy 5 items use checkout code SAVE25
Shipping from United Kingdom
Processing time
1 business day
Estimated shipping times
- United Kingdom : 2 - 6 business days
- North America : 8 - 15 business days
- Europe : 8 - 15 business days
- Australia, New Zealand and Oceania : 8 - 15 business days
I'll do my best to meet these shipping estimates, but can't guarantee them. Actual delivery time will depend on the shipping method you choose.
Customs and import taxes
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Payment Options
Returns & Exchanges
Returns & exchanges accepted within 30 days
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
I gladly accept returns, exchanges, and cancellations
Request a cancellation within: 0 hours of purchase
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
- Custom or personalized orders
- Perishable products (like food or flowers)
- Digital downloads
- Intimate items (for health/hygiene reasons)
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Questions about your order?
Please contact me if you have any problems with your order.
Privacy policy
I store no customer data other than that stored in Etsy systems.